Description
IDTECK IDT900C | 900MHz UHF Long-Range Passive RFID Cards
The IDTECK IDT900C is a 900MHz UHF passive RFID card designed for long-range identification applications using compatible IDTECK RF900K and RF900KT Series readers. Built for parking, vehicle management and access control environments, the IDT900C supports EPC Class 1 Gen 2, ISO 18000-6C and ISO 18000-6B protocols, providing a practical credential option where hands-free or extended-range identification is preferred over close-proximity card presentation. These passive UHF credentials require no internal battery and are sold in packages of 50 cards.
Key Features
- Manufacturer: IDTECK
- Model: IDT900C
- Technology: UHF RFID
- Frequency: 900MHz
- Credential Type: Passive RFID card
- Protocol: EPC Class 1 Gen 2
- Protocol Support: ISO 18000-6C / ISO 18000-6B
- Compatible Readers: RF900K Series and RF900KT Series
- Primary Applications: Parking, access control and vehicle management
- Package Quantity: 50 cards
Long-Range UHF Identification
Unlike conventional low-frequency proximity credentials that are typically presented close to a reader, the IDT900C UHF card is intended for compatible long-range RFID applications. This makes it especially useful in vehicle lanes, parking facilities and controlled entry points where efficient credential detection can help reduce the need for drivers or users to physically present a card at close range.
Because the IDT900C is a passive credential, it does not rely on an internal battery. Energy from the compatible UHF reader is used to power the credential during communication.
Ideal Applications
- Parking access control
- Vehicle identification
- Employee parking facilities
- Gated entry systems
- Commercial access control
- Vehicle management systems
- Controlled facility entrances
- Long-range RFID identification applications
Compatible Reader Families
- IDTECK RF900K Series
- IDTECK RF900KT Series
Verify the exact reader model, protocol configuration and system requirements before ordering replacement or additional credentials.
Supported UHF Protocols
- EPC Class 1 Generation 2
- ISO 18000-6C
- ISO 18000-6B
Protocol compatibility is important when adding credentials to an existing UHF RFID installation. Confirm the protocol used by the reader and access control platform before ordering.
UHF Long-Range Card vs. Standard Proximity Credential
| Feature | IDT900C UHF Card | Standard Proximity Card |
|---|---|---|
| Technology | 900MHz UHF RFID | Typically low-frequency proximity RFID |
| Credential Type | Passive long-range RFID | Close-proximity credential |
| Typical Application | Vehicle access, parking and long-range identification | Door access and close-range identification |
| Reader Compatibility | Compatible UHF reader required | Compatible proximity reader required |
Compatibility Note
The IDTECK IDT900C is a UHF RFID credential intended for compatible RF900K and RF900KT Series readers. It is not interchangeable with standard 125kHz proximity cards simply because both products are used for access control. Confirm reader model, operating protocol and system configuration before ordering.
Ordering Information
This listing includes 50 IDTECK IDT900C passive UHF RFID cards. These credentials are designed for compatible IDTECK RF900K and RF900KT long-range reader applications used in parking, vehicle management and access control systems.
