Description
The Paxton 900-081-US PaxLock Pro Mortise Door Installation Jig is a reusable installation tool designed to help installers accurately prepare doors for Paxton PaxLock Pro Mortise electronic lock hardware. Adjustable for door thicknesses from 1-3/4" to 2-1/4", the jig helps accurately locate and drill the required through-door holes, making PaxLock Pro installations faster, more consistent, and easier to repeat across multiple doors.
Proper door preparation is critical when installing electronic mortise lock hardware. Existing doors may have inaccurate or inconsistent carpentry left behind after older handles or locksets are removed.
The 900-081-US installation jig provides installers with a repeatable guide for marking and drilling the through-door holes required for the PaxLock Pro Mortise, helping reduce layout errors and unnecessary rework.
Because the jig can be used repeatedly, it is particularly useful for schools, offices, healthcare facilities, government buildings, campuses, and other projects where multiple PaxLock Pro Mortise locks are being installed.
Using the same installation jig from door to door helps maintain consistent drilling locations and can significantly improve installation efficiency on larger access control projects.
- Designed specifically for Paxton PaxLock Pro Mortise installations
- Helps accurately mark and drill required through-door holes
- Adjustable for door thicknesses from 1-3/4" to 2-1/4"
- Helps correct or avoid inaccurate existing door preparation
- Reusable for multiple installations
- Promotes consistent installation from door to door
- Helps reduce measuring and layout time
- Useful for both retrofit and new-door preparation
- Excellent installation tool for large access control projects
- Genuine Paxton installation accessory
- 1-3/4" Doors: Standard PaxLock Pro Mortise installation
- 2" Doors: Compatible with applicable PaxLock Pro Mortise wide-door hardware
- 2-1/4" Doors: Compatible with applicable PaxLock Pro Mortise wide-door hardware
- Jig Adjustment Range: 1-3/4" through 2-1/4"
- Manufacturer: Paxton Access
- Part Number: 900-081-US
- Product Type: Door Installation Jig
- Application: PaxLock Pro Mortise
- Door Thickness Range: 1-3/4" to 2-1/4"
- Use: Marking and Drilling Through-Door Holes
- Reusable: Yes
When replacing existing lock hardware, installers cannot always assume the original holes or carpentry are correctly positioned for the new lock. Even small alignment errors can slow installation or affect how the finished hardware fits the door.
The Paxton 900-081-US gives installers a purpose-built reference for preparing the door correctly before installing the PaxLock Pro Mortise. On projects involving multiple openings, the reusable jig helps standardize preparation and reduce repetitive measuring, making it a valuable addition to an access control installer’s tool kit.
Paxton recommends proper door preparation before installing PaxLock Pro Mortise hardware. The installation jig is designed to assist with accurately locating the through-door holes required for installation.
For thicker doors, separate PaxLock Pro Mortise door kits may be required. Always verify the lock configuration, door thickness, and Paxton drilling requirements before installation.
Paxton – Ordering a PaxLock Pro Mortise / Installation Jig Information | Paxton PaxLock Pro Mortise Drilling Template
While we strive to provide accurate imagery, product photos may not reflect the exact model or configuration offered. Please refer to the product description and part number for details, or contact us for assistance before ordering.
