Description
rf IDEAS WAVE ID® Plus Surface Mount USB Reader | RDR-805W1BKU-C72
Use compatible employee ID badges, proximity cards, and contactless smart cards for computer-based identification with the rf IDEAS WAVE ID® Plus RDR-805W1BKU-C72. This black surface-mount USB-A reader reads supported 125/132 kHz proximity credentials and 13.56 MHz contactless smart cards, making it a practical choice for locations where both credential types are in use. The 6-foot USB cable gives installers room to place the reader at a convenient tap point on a counter, kiosk, or workstation.
Key Features
- Dual-frequency reading supports select low-frequency proximity and high-frequency contactless credentials from a single reader.
- USB keyboard emulation sends the configured badge ID to the active field in a compatible application.
- USB-powered design draws power from the host through the USB-A connection.
- Low-profile black housing measures approximately 4.5 × 2.75 × 0.62 inches for fixed-position installations.
- LED and adjustable beeper give users visible and audible feedback at the reader.
Common Applications
- Employee time and attendance at shared terminals.
- Visitor and employee check-in at reception counters and kiosks.
- Badge-based sign-in for compatible workstation and enterprise applications.
- Credential enrollment at a USB-connected badging station.
- Credential migrations where supported legacy proximity cards and newer smart cards are used at the same site.
Card and Badge Compatibility
Examples of supported credentials include HID® Prox, AWID, Kantech ioProx, and Indala, along with card serial number (CSN) reading for supported MIFARE® Classic, MIFARE DESFire® EV1, and HID iCLASS® credentials. When ordering, match both the credential technology and the data your software expects. Confirm whether the application uses the card serial number, a formatted badge ID, or data stored in a secure application on the card.
Frequently Asked Questions
Can I use the same reader for proximity badges and smart cards?
Yes. The WAVE ID Plus supports both frequency ranges. Verify each badge type against the manufacturer’s compatibility information and confirm the output your software needs.
How does the reader send the badge number to my software?
In keystroke mode, the reader enters the configured badge ID as keyboard input. Your application needs an active input field that accepts the badge number in the format you configure.
Does this model replace the RDR-805W1AKU-C72?
Yes. rf IDEAS lists the RDR-805W1BKU-C72 as the migration model for the RDR-805W1AKU-C72. When replacing an existing reader, verify the card type and badge ID output settings used by your application.
Manufacturer Documentation
Check dimensions, credential support, and interface options before specifying the reader.
View the rf IDEAS WAVE ID Plus Surface Mount Datasheet (PDF)Product Image
While we strive to provide accurate imagery, product photos may not reflect the exact model or configuration offered. Please refer to the product description and part number for details, or contact us for assistance before ordering.