Description
Brady 3943-1020 Stapler-Style Slot Punch with Adjustable Guide
Add a clean, consistently positioned slot to employee ID cards, visitor badges, and event credentials with the Brady 3943-1020 stapler-style slot punch. This manual desktop punch cuts a 1/8" × 0.550" rectangular slot (approximately 3 × 14 mm) for compatible badge clips and strap attachments. The adjustable centering guide helps you align each card for repeatable placement, and the built-in receptacle catches clippings as you work.
Key Features
- Rectangular badge slot. Cuts a 1/8" × 0.550" opening for compatible badge straps, clips, and other attachments designed for slotted cards.
- Adjustable centering guide. Helps position the card and repeat the same slot placement across a batch.
- Stapler-style desktop operation. Place the punch on a flat work surface, align the card, and press the handle to cut the slot.
- Plastic card capacity. Punches plastic cards up to 33 mil thick, including standard 30 mil PVC ID cards.
- Built-in clipping receptacle. Collects the cutouts to keep the badge preparation area tidy.
Applications
- Employee and contractor badges. Slot standard CR80 ID cards measuring 3.375" × 2.125" so they can attach directly to a compatible badge strap or clip.
- School and campus IDs. Set the guide for your badge layout and use the same setting for student or staff cards in the batch.
- Visitor passes and event credentials. Add a slot for compatible lanyard attachments or badge reels with a strap end.
Frequently Asked Questions
Can I use this punch on both portrait and landscape badges?
Yes. Align the short edge for a portrait badge or the long edge for a landscape badge. Adjust the centering guide and check the slot position on a sample card before punching the rest of the batch.
Will the Brady 3943-1020 punch standard PVC ID cards?
Yes. Standard 30 mil PVC ID cards are within the punch’s 33 mil plastic card capacity. For laminated cards, check the total thickness of the finished card, including the laminate.
Can I slot proximity cards or contactless smart cards?
Check the credential manufacturer’s approved punch location before slotting. A punch that cuts through the embedded antenna or chip can make the card unreadable.
Product Image
While we strive to provide accurate imagery, product photos may not reflect the exact model or configuration offered. Please refer to the product description and part number for details, or contact us for assistance before ordering.