Description
IDE SLOT-113 Stapler-Style Slot Punch with Adjustable Guide
Add a clean, oblong attachment slot to PVC ID cards with the IDE SLOT-113 Stapler-Style Slot Punch. The manual punch creates a 13 × 3 mm slot for compatible badge reel straps, vinyl strap clips, and lanyard attachments. Adjustable horizontal, vertical, and depth guides help you position the slot consistently across a batch of employee photo IDs, student badges, or plastic visitor passes.
Key Features
- Stapler-style operation makes it easy to position and punch one card at a time.
- Adjustable guides help repeat slot placement when producing multiple badges with the same layout.
- 6–11 mm adjustable punch margin lets you set the slot position relative to the card edge.
- 13 × 3 mm oblong slot accepts compatible flat badge straps and clips.
Applications
- Employee photo IDs for HR departments, security offices, and in-house badging stations.
- Student and staff badges for schools, colleges, and training centers.
- Visitor and event passes made from compatible PVC card stock.
- Replacement badges where the slot needs to line up with the existing card design.
Technical Specifications
| Brand and SKU | IDE SLOT-113 |
|---|---|
| Punch Type | Manual stapler-style slot punch |
| Slot Size | 13 mm long × 3 mm wide |
| Adjustable Punch Margin | 6–11 mm |
| Maximum PVC Thickness | 1.2 mm for soft PVC or 0.8 mm for hard PVC |
| Warranty | One-year manufacturer’s limited warranty |
How to Position the Slot
For a landscape badge, position the slot along the top long edge. For a portrait badge, use the top short edge. Adjust the guide and test the position on a spare card of the same stock before punching the batch. Check that the badge hangs straight with your chosen attachment and that the slot clears the artwork, barcode, or other printed information.
Frequently Asked Questions
Will the SLOT-113 punch standard 30 mil CR80 PVC cards?
Yes. A standard CR80 card measures approximately 3.375 × 2.125 inches, and 30 mil is approximately 0.76 mm thick, within the SLOT-113’s 0.8 mm limit for hard PVC. Check the finished thickness if your card has an added laminate or overlay.
Can I use this punch on proximity cards or contactless smart cards?
Confirm the credential manufacturer permits slot punching and use only the designated punch area. A punch through the embedded antenna or chip can make the credential unreadable. If you cannot verify a safe location, use a badge holder.
Should I punch the card before or after printing?
For cards you print in-house, plan the slot location in the artwork, then print and punch the card. This lets you check the slot against the finished design before cutting.
What badge attachments fit the slot?
The 13 × 3 mm slot is designed for compatible vinyl strap clips, badge reels with flat straps, and lanyard attachments sized to pass through the opening. Check the attachment dimensions before ordering. Browse ID badge clips and straps.
While we strive to provide accurate imagery, product photos may not reflect the exact model or configuration offered. Please refer to the product description and part number for details, or contact us for assistance before ordering.