Description
Inovonics EN1248 EchoStream Wireless Glassbreak Detector
The Inovonics EN1248 EchoStream Wireless Glassbreak Detector is a fully supervised, omnidirectional acoustic glassbreak detector that adds wireless perimeter protection to compatible Inovonics EchoStream security systems. Built for professional security applications, it brings dependable wireless operation and practical system supervision to new installations and compatible system expansions.
This genuine Inovonics component operates on the EchoStream wireless platform. It must be registered, programmed and tested with compatible Inovonics receiving equipment before being placed into service.
Key Features
- Omnidirectional acoustic detection with 180-degree coverage measured from the sensor to the farthest point on the protected glass
- Supervised low-battery and tamper conditions support reliable system maintenance
- Walk-test capability helps installers verify operation
- Wireless EchoStream design reduces cabling requirements
- Direct replacement for the Inovonics EN1247 glassbreak detector
Recommended Applications
- Retail storefront windows
- Commercial offices
- Financial institutions
- Schools and institutional buildings
- Interior perimeter-security applications
Compatibility and Ordering Guidance
Glass type, room acoustics, mounting distance, curtains, blinds and other environmental conditions can affect acoustic glassbreak performance. The EN1248 must be registered with a compatible Inovonics receiver or gateway and professionally located and tested for the protected glass. Follow the manufacturer installation instructions and test the detector after registration.
Technical Specifications
| Platform | Inovonics EchoStream |
| Frequency | 902–928 MHz, North America |
| Detection | Omnidirectional acoustic glassbreak detection |
| Coverage | 180° from detector to farthest point on protected glass |
| Dimensions | 2.5 × 2.5 × 0.9 in. (63 × 63 × 22 mm) |
| Weight | 4.2 oz. (120 g) |
| Supervision | Low battery and tamper |
| Replaces | Inovonics EN1247 |
Specifications are subject to change. Confirm current requirements in the manufacturer documentation before installation.
Professional Installation
System performance depends on correct product selection, placement, registration, programming and testing. Installation should be completed by a qualified security professional familiar with the Inovonics EchoStream platform.
Manufacturer Documentation PDFFrequently Asked Questions
Is the EN1248 EchoStream Wireless Glassbreak Detector a standalone device?
No. It is designed for use as part of a compatible Inovonics wireless system and requires appropriate receiving equipment, registration and system programming.
Should compatibility be verified before ordering?
Yes. Verify the installed receiver or gateway, supported device type, available system capacity, regional frequency and head-end programming requirements.
Does the device need to be tested after installation?
Yes. Test the device and the complete alarm or reporting path after registration and as part of the facility’s scheduled inspection and maintenance program.
Order Inovonics EN1248 EchoStream Wireless Glassbreak Detector
Choose the genuine Inovonics EN1248 EchoStream Wireless Glassbreak Detector for a professionally designed compatible Inovonics installation. Review receiver compatibility, application requirements and manufacturer documentation before ordering.
