Description
Inovonics EN1263 EchoStream Motion Detector with Pet Immunity
The Inovonics EN1263 EchoStream Motion Detector with Pet Immunity is an advanced, fully supervised low-current wireless PIR motion detector that combines mirror-optics detection with pet immunity for compatible Inovonics EchoStream intrusion systems. Built for professional security applications, it brings dependable wireless operation and practical system supervision to new installations and compatible system expansions.
This genuine Inovonics component operates on the EchoStream wireless platform. It must be registered, programmed and tested with compatible Inovonics receiving equipment before being placed into service.
Key Features
- Pet immunity for animals weighing up to 55 lb. (25 kg)
- Quad-element wall-mount PIR sensor
- Mirror-optics detection supports reliable motion sensing
- Intelligent sleep timer helps extend battery life
- Supervised low-battery and tamper reporting
- Designed as the current replacement for the Inovonics EN1262
Recommended Applications
- Commercial offices
- Retail and mixed-use properties
- Facilities where approved pets may be present
- Schools and institutional buildings
- Wireless interior intrusion detection
Compatibility and Ordering Guidance
Pet immunity depends on correct mounting height, detector aim, room layout and animal behavior; it does not guarantee that an animal can never cause an alarm. Avoid locations where pets can climb into the detection field. Register the EN1263 with a compatible Inovonics system and complete a walk test after installation.
Technical Specifications
| Platform | Inovonics EchoStream |
| Frequency | 902–928 MHz, North America |
| Detection method | Quad-element PIR with mirror optics |
| Coverage area | 26 ft. (8 m) |
| Pet immunity | Up to 55 lb. (25 kg) |
| Mounting height | 6 ft. 5 in. to 7 ft. 5 in. |
| Warm-up period | Approximately 40 seconds |
| Check-in time | Three minutes |
| Replaces | Inovonics EN1262 |
Specifications are subject to change. Confirm current requirements in the manufacturer documentation before installation.
Professional Installation
System performance depends on correct product selection, placement, registration, programming and testing. Installation should be completed by a qualified security professional familiar with the Inovonics EchoStream platform.
Manufacturer Documentation PDFFrequently Asked Questions
Is the EN1263 EchoStream Motion Detector with Pet Immunity a standalone device?
No. It is designed for use as part of a compatible Inovonics wireless system and requires appropriate receiving equipment, registration and system programming.
Should compatibility be verified before ordering?
Yes. Verify the installed receiver or gateway, supported device type, available system capacity, regional frequency and head-end programming requirements.
Does the device need to be tested after installation?
Yes. Test the device and the complete alarm or reporting path after registration and as part of the facility’s scheduled inspection and maintenance program.
Order Inovonics EN1263 EchoStream Motion Detector with Pet Immunity
Choose the genuine Inovonics EN1263 EchoStream Motion Detector with Pet Immunity for a professionally designed compatible Inovonics installation. Review receiver compatibility, application requirements and manufacturer documentation before ordering.
