Sub Categories
Schlage 125 kHz Proximity Credentials: The XceedID, Ingersoll Rand, Allegion & Schlage Story
If an older proximity card, key fob or tag in your access control system says XceedID, an Allegion catalog refers to the same part number, and today's product carries the Schlage name, you are not imagining things. The branding surrounding this credential family has changed significantly over the years.
The good news is that the technology did not simply disappear when the name changed. Understanding the history can help facility managers, dealers, integrators and purchasing departments identify the credential they have today — and determine whether a current Schlage credential or a RapidPROX® credential may be the right choice for an existing 125 kHz proximity system.
One Credential Family. A Changing Brand History.
XceedID became well known in the physical access control market for readers and credentials using contactless RFID technologies, including traditional 125 kHz proximity credentials.
Over time, ownership and branding changed. XceedID became part of Ingersoll Rand, transitioned into the Allegion security portfolio when Allegion became an independent company, and was ultimately consolidated under the much larger Schlage brand.
That history explains why a customer may encounter the names XceedID, Ingersoll Rand Security Technologies, Allegion and Schlage while researching what is essentially the same credential family.
In an existing access control system, identifying a replacement credential is about more than matching the brand printed on the card. Frequency, credential technology, bit format, facility code, card number and reader compatibility can all matter.
How XceedID Became Schlage: A Timeline
XceedID was founded in 2003 as a company focused on RFID, contactless credential technologies, readers and physical access control applications. Its product portfolio eventually became familiar to integrators and end users needing proximity and smart credential solutions.
XceedID was acquired by Ingersoll Rand in 2008 and became part of the company's security technologies business. XceedID continued to be recognized in the marketplace as a reader and credential brand.
Ingersoll Rand separated its commercial and residential security businesses into a new publicly traded company named Allegion plc.
At the time, Allegion's portfolio included established security brands such as Schlage, Von Duprin, LCN and XceedID. XceedID therefore became part of the Allegion family rather than being sold to a separate credential manufacturer.
Effective September 25, 2017, Allegion announced that its XceedID reader and credential portfolio, along with the aptiQ portfolio, would carry the Schlage name.
Allegion specifically stated that the products, part numbers and compatibility would remain the same. The major change was the brand under which the products were offered.
Familiar XceedID Numbers Did Not Simply Disappear
One of the most useful aspects of the transition is that many familiar XceedID product numbers continued under Schlage branding. That can make identifying an older credential considerably easier.
| Product Number | Credential Type | Typical Description |
|---|---|---|
| 7410 | Proximity Card | 125 kHz clamshell-style credential |
| 7510 | ISO Proximity Card | Glossy white ISO-style proximity credential |
| 7510M1 | Proximity + Magstripe | ISO proximity card with magnetic stripe |
| 7610 | Key Fob | 125 kHz proximity key fob |
| 7610T | Thin Key Fob | Thin-profile 125 kHz proximity key fob |
| 7010 | Adhesive Credential | 125 kHz PVC adhesive proximity disk |
Product availability, programming options and compatibility should always be verified for the specific access control installation.
What Actually Determines Whether a Replacement Credential Will Work?
When replacing an older XceedID, Allegion or Schlage proximity credential, the name printed on the credential is only one piece of the puzzle. Several technical factors should be confirmed.
While the XceedID credential family moved through different companies and ultimately adopted the Schlage name, RapidPROX® has provided another approach for organizations maintaining established 125 kHz proximity access control systems.
In many existing installations, what matters most is not the logo printed on the credential but whether the replacement credential can be correctly configured for the technology, reader, bit format, facility code and card-number requirements of the access control system.
That means an organization replacing older XceedID, Allegion or Schlage proximity credentials may have more than one option. Depending on the system and credential configuration, a RapidPROX® credential may deserve serious consideration.
Your Old Card Says XceedID. What Should You Order?
Start with the part number and any programming information available from the existing credential or access control database.
Do not assume that any 125 kHz card or fob will work simply because it operates at the same frequency. Different manufacturers and credential families may use different encoding methods and formats.
Your Existing Readers May Not Need to Be Replaced
A change in branding on the credential does not automatically mean an installed reader has become obsolete.
If an existing 125 kHz system is functioning properly, correctly programmed credentials can often allow an organization to continue using the infrastructure it already owns.
Is 125kHz Proximity Technology Still Relevant?
Yes — particularly for existing systems. But it is important to understand where 125 kHz proximity technology fits in today's security landscape.
Schlage itself describes 125 kHz proximity credentials as a legacy access solution intended largely for existing installations. Traditional low-frequency proximity credentials do not provide the same level of encryption and authentication available with modern smart-card technologies.
For a new installation or a facility requiring a higher level of credential security, technologies such as MIFARE DESFire and other secure 13.56 MHz smart credentials may warrant consideration.
However, many organizations have substantial investments in existing 125 kHz readers, panels and credential databases. For those facilities, continuing to use properly configured proximity credentials can be a practical way to extend the useful life of the installed access control system.
Moving Beyond 125 kHz? You Do Not Necessarily Have to Change Everything at Once.
Organizations planning a transition to newer credential technologies may be able to migrate in stages rather than replacing every credential and reader simultaneously.
Multi-technology credentials can combine traditional 125 kHz proximity with newer 13.56 MHz smart credential technologies, allowing compatible facilities to continue operating legacy readers while newer readers are introduced over time.
More Than a Part Number: ID Enhancements Helps You Identify the Right Credential
Credential replacement becomes more complicated when the product has been sold under several names over its lifetime. ID Enhancements has supplied proximity credentials and access control products for decades and understands the questions that must be answered before ordering.
Help determine what an older XceedID, Allegion or Schlage part number represents.
Confirm available format, facility code and card-number information.
Determine whether Schlage or RapidPROX may fit the requirements of the installation.
Programming, numbering, personalization and production support for organizations requiring credentials at scale.
Frequently Asked Questions About XceedID, Allegion & Schlage 125 kHz Credentials
Answers to common questions about older XceedID credentials and today's Schlage proximity products.
Is XceedID still in business?
XceedID no longer operates as the standalone access control brand customers once knew. The XceedID reader and credential portfolio became part of Allegion and was subsequently rebranded under the Schlage name.
Did Identiv buy XceedID?
No. XceedID was acquired by Ingersoll Rand in 2008. When Ingersoll Rand separated its security businesses in 2013, XceedID became part of Allegion. The XceedID reader and credential portfolio was then rebranded Schlage in 2017.
Are XceedID credentials now called Schlage credentials?
Many of the XceedID credential products were transitioned into the Schlage portfolio. Allegion announced in 2017 that XceedID readers and credentials would carry the Schlage name while product numbers and compatibility remained the same for the transition.
Can I still buy an XceedID 7410 proximity card?
The 7410 product number continued under Schlage branding as a 125 kHz clamshell proximity card. Always verify current availability, format and programming requirements before ordering.
What happened to the XceedID 7510 card?
The 7510 number continued within the Schlage proximity credential portfolio as an ISO glossy white 125 kHz proximity card. The 7510M1 version combines proximity technology with a magnetic stripe.
What replaced the XceedID 7610 key fob?
The 7610 part number continued under Schlage as a 125 kHz proximity key fob. A thin-profile 7610T version is also associated with the credential family.
Will a Schlage proximity card work with an older XceedID reader?
It may, depending on the reader, credential technology and programming. Because many products retained compatibility through the XceedID-to-Schlage transition, existing systems may support current Schlage credentials. However, compatibility should always be confirmed for the specific reader and credential configuration.
Can RapidPROX® be used instead of a Schlage or XceedID proximity credential?
In many 125 kHz access control applications, a RapidPROX credential may be an option, but compatibility should never be assumed from appearance or frequency alone. The reader technology, bit format, facility code, card number range and other system requirements should be reviewed first. ID Enhancements can help determine whether RapidPROX is appropriate for the specific installation.
Are all 125 kHz proximity cards interchangeable?
No. Two credentials can both operate at 125 kHz and still use different technologies, data structures or programming. Frequency alone is not enough to establish compatibility.
What information should I provide when ordering replacement proximity credentials?
When possible, provide:
- Existing credential manufacturer and part number
- Credential technology
- Bit format
- Facility or site code
- Existing or desired card number range
- Reader manufacturer or model
- A previous order number, if available
Should I replace my 125 kHz proximity system with newer technology?
It depends on the security requirements of the facility. Traditional 125 kHz proximity is considered legacy technology and does not offer the advanced encryption available from many newer smart-card technologies. Organizations planning new high-security installations should evaluate newer credential technologies. Facilities with existing proximity infrastructure may choose to continue using that system or transition gradually.
I do not know my facility code or bit format. Can ID Enhancements help?
Yes. If you have an existing credential, previous order information or details about the installed reader and access control system, contact ID Enhancements. Our team can help review the available information, identify the credential family and determine what additional information may be needed before new credentials are programmed.
You may not need to start over. ID Enhancements can help identify the credential, determine the current Schlage equivalent and evaluate whether RapidPROX® offers an appropriate option for your existing 125 kHz proximity system.
