Description
Inovonics EN7290 EchoStream Serial Receiver/Interface for Honeywell Commercial VISTA Panels
The Inovonics EN7290 EchoStream® Serial Receiver/Interface integrates compatible Inovonics wireless security devices with supported Honeywell commercial VISTA control panels. It receives EchoStream wireless messages and converts them into a format the Honeywell panel can recognize, allowing security professionals to add high-performance Inovonics wireless transmitters to compatible VISTA-128 and VISTA-250 systems.
The EN7290 supports up to 127 registered devices with a compatible VISTA-128 panel and up to 249 registered devices with a compatible VISTA-250 panel. It connects using the same power and data-bus wiring arrangement commonly used by Honeywell 5800 Series receivers, helping experienced VISTA installers incorporate EchoStream wireless coverage into established panel architectures.
Operating on the North American 902–928 MHz EchoStream frequency, the EN7290 provides wall-tamper protection and operational LEDs for power, RF communication, data-in, and data-out activity. The receiver is well suited for commercial intrusion, panic, hold-up, perimeter, and large-facility security applications requiring direct integration with an approved Honeywell VISTA panel.
Panel-Specific Interface: The EN7290 is designed for compatible Honeywell commercial VISTA-128 and VISTA-250 panels. It is not a universal serial receiver and should not be ordered for an unrelated panel simply because that panel supports wireless devices. Verify the exact panel model and firmware before purchasing.
Key Features and Benefits
- Direct Honeywell VISTA integration: Converts EchoStream wireless messages for compatible commercial VISTA-128 and VISTA-250 panels.
- High device capacity: Supports up to 127 devices with VISTA-128 panels and 249 devices with VISTA-250 panels.
- EchoStream wireless performance: Uses 902–928 MHz frequency-hopping spread-spectrum technology in North America.
- Familiar panel wiring: Uses the same power and data connection arrangement as Honeywell 5800 Series receivers.
- Panel-bus communication: Exchanges device information with the connected panel through dedicated data-in and data-out connections.
- Device supervision: Supports compatible alarm, restoration, tamper, low-battery, and supervision conditions.
- Operational LEDs: Provides visual indications for power, EchoStream RF activity, incoming panel data, and outgoing panel data.
- Wall-tamper protection: Helps identify removal of the receiver from its installed position.
- Repeater compatibility: Supports compatible EchoStream high-power repeaters for larger buildings and campuses.
- Commercial security design: Intended for professionally installed intrusion, panic, hold-up, and other qualifying alarm applications.
Technical Specifications
| Manufacturer | Inovonics Wireless Corporation |
| Model | EN7290 |
| Product Type | Serial receiver/interface for Honeywell VISTA |
| Wireless Platform | Inovonics EchoStream® |
| North American Frequency | 902–928 MHz |
| RF Technology | Frequency-hopping spread spectrum |
| VISTA-128 Capacity | Up to 127 registered devices |
| VISTA-250 Capacity | Up to 249 registered devices |
| Panel Connection | Power, ground, data in and data out |
| Recommended Device Address | Address 06 when available |
| Power Requirement | 12 VDC at 125 mA |
| Dimensions | 6.38 × 3.60 × 1.10 in. (162 × 91.4 × 27.9 mm) |
| Weight | 7.2 oz. (204 g) |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Operating Humidity | Up to 90% relative humidity, non-condensing |
| Regulatory Compliance | FCC, RoHS, UL 365, UL 609, UL 1023, UL 1076, UL 1610 and additional listed standards |
Compatible Honeywell Commercial VISTA Panels
Current product literature identifies the EN7290 for compatible panels within the following Honeywell commercial VISTA families:
- VISTA-128BPE
- VISTA-128BPT
- VISTA-128FBP-9
- VISTA-128FBPT
- VISTA-250BPE
- VISTA-250BPT
- VISTA-250FBP-9
- VISTA-250FBPT
Buyer guidance: Honeywell has produced multiple VISTA generations, revisions, and branded variations. Verify the exact panel model, firmware revision, available device address, receiver capacity, and programming requirements before ordering.
How the EN7290 Integrates EchoStream with VISTA
The EN7290 receives wireless transmissions from registered EchoStream security devices and translates the resulting messages into a format compatible with the Honeywell VISTA panel’s receiver interface. The panel then processes those messages as programmed wireless zones.
The EN7290 connects to the VISTA panel using positive power, negative power, data-out, and data-in conductors. The receiver must be assigned an available panel device address and programmed as an RF receiver or expander in accordance with the applicable VISTA programming instructions.
Important Device Registration Process
Each Inovonics device must be registered with both the EN7290 and the Honeywell VISTA control panel. Inovonics instructs installers to register devices with the EN7290 first and then complete the corresponding zone enrollment and programming at the VISTA panel.
1. Register with EN7290
Place the receiver in registration mode and activate the transmitter’s reset or enrollment function.
2. Enroll with VISTA
Use the device’s transmitter identification number to enroll and program the corresponding VISTA wireless zone.
3. Test All Conditions
Verify alarms, restorations, tampers, supervision, low battery, and any secondary conditions supported by the device.
Panel or backup power should be maintained during registration. A loss of power during enrollment may corrupt registration data.
Operational LED Indicators
Power LED
Confirms that the EN7290 is receiving the required operating power.
RF Communications
Indicates EchoStream wireless communication received from compatible devices.
Data In LED
Provides visual confirmation of data received from the connected VISTA panel.
Data Out LED
Indicates data being transmitted from the receiver/interface to the panel.
Recommended Applications
- Honeywell commercial VISTA wireless expansion
- Commercial intrusion detection
- Wireless door and window protection
- Panic, hold-up, and duress systems
- Wireless motion and glass-break detection
- Retail and financial security
- Healthcare and institutional facilities
- Warehouses and industrial properties
- Multi-floor commercial buildings
- Large systems using EchoStream repeaters
EchoStream Device Compatibility
The EN7290 supports compatible EchoStream security devices. Current Inovonics literature identifies the following models for qualifying UL applications:
- EN1215EOL Universal Transmitter
- EN1215WEOL Door/Window Transmitter
- EN1223D Double-Button Pendant
- EN1235SF Fixed-Position Hold-Up Transmitter
- EN1235DF Double-Button Hold-Up Transmitter
- EN1249 Billtrap Transmitter
- EN1261HT High-Traffic Motion Detector
- EN5040-T High-Power Repeater
Compatibility warning: Receiver compatibility does not guarantee that every VISTA panel supports every transmitter condition. Verify the panel model, firmware, zone type, input loop, supervision, and listing requirements for each device.
EN7290 vs. Other Inovonics Receivers
| Model | Connection | Primary Application |
|---|---|---|
| EN7290 | Honeywell VISTA power/data bus | Direct integration with compatible commercial VISTA panels |
| EN4200 | RS-232 serial | Security-only head-end application integration |
| EN4000 | RS-232 serial | Universal one-way transmitter application integration |
| EN4204R/EN4216MR/EN4232MR | Form C relay outputs | Wireless expansion through conventional hardwired inputs |
What to Verify Before Ordering
- Exact panel model: Confirm that the control panel is a supported commercial VISTA-128 or VISTA-250 model.
- Panel firmware: Verify the required firmware revision and current manufacturer compatibility.
- Available capacity: Confirm the number of unused wireless zones and total supported devices.
- Receiver count: Verify how many wireless receivers the panel supports and whether another receiver is already installed.
- Device address: Confirm that an appropriate receiver address is available and correctly programmed.
- Transmitter models: Verify each EchoStream device and every alarm or trouble condition required.
- RF coverage: Complete an EchoStream survey and determine whether EN5040-T repeaters are needed.
- UL requirements: Confirm that the receiver, panel, transmitters, repeaters, power, wiring, and programming meet the required listing.
Installation and Programming Guidance
- Install the receiver indoors in an accessible location away from large metal objects and RF obstructions.
- Use properly sized wiring for power, ground, data-in, and data-out connections.
- Connect the EN7290 to the correct VISTA panel terminals shown in the manufacturer instructions.
- Assign the receiver an unused device address and program that address into the panel.
- Register every EchoStream device with the EN7290 before completing VISTA zone enrollment.
- Confirm that each device transmitter identification number is unique.
- Maintain panel or backup power during the device-registration process.
- Verify all alarm loops, zone types, restorations, tampers, low-battery signals, and supervision conditions.
- Perform an RF walk test from every transmitter location.
- Test the complete alarm system after installation and at regular intervals.
Professional installation required: The EN7290 should be installed and programmed by a qualified security professional familiar with Honeywell commercial VISTA panels and Inovonics EchoStream systems.
Frequently Asked Questions
What does the Inovonics EN7290 do?
It receives EchoStream wireless security messages and converts them into a format compatible with supported Honeywell commercial VISTA-128 and VISTA-250 panels.
Which Honeywell panels work with the EN7290?
Current product literature identifies compatible commercial models within the VISTA-128 and VISTA-250 families. The exact model and firmware should be verified before ordering.
How many devices can the EN7290 support?
It supports up to 127 registered devices with a compatible VISTA-128 panel and up to 249 registered devices with a compatible VISTA-250 panel. Actual available capacity depends on the panel and existing programming.
Is the EN7290 a universal serial receiver?
No. It is a panel-specific interface designed for compatible Honeywell commercial VISTA systems.
Do transmitters need to be registered twice?
Yes. Compatible devices must be registered with the EN7290 and enrolled as wireless zones in the VISTA panel. Inovonics instructs installers to register devices with the EN7290 first.
Does the EN7290 use Form C relays?
No. It connects directly to the VISTA panel’s power and data bus. For relay-based wireless expansion, review the EN4204R, EN4216MR, or EN4232MR.
Can EchoStream repeaters be used with the EN7290?
Yes. Compatible EN5040-T high-power repeaters can extend wireless coverage when properly installed, registered, and supervised.
What power does the EN7290 require?
The receiver requires 12 VDC at approximately 125 mA and is typically powered through the compatible VISTA panel connection.
Does the EN7290 include tamper protection?
Yes. The receiver includes wall-tamper protection to help identify removal from its installed position.
Manufacturer Documents
Documents are provided by Inovonics Wireless Corporation. Honeywell panel compatibility, firmware requirements, transmitter support, and specifications are subject to change.
Direct EchoStream Integration for Commercial VISTA Panels
The Inovonics EN7290 EchoStream Serial Receiver/Interface provides a direct way to incorporate compatible EchoStream security transmitters into supported Honeywell commercial VISTA-128 and VISTA-250 systems. Its high device capacity, familiar receiver wiring, panel-bus communication, operational LEDs, wall tamper, repeater support, and commercial security certifications make it a strong solution for expanding qualifying VISTA installations with reliable Inovonics wireless coverage.
